206
Syntax
issu commit slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies the member ID of the original master or a subordinate member that has
not been upgraded.
Usage guidelines
At reboot, a subordinate device automatically synchronizes the master device's configuration and
status data. You must wait for the synchronization to complete before using the issu commit
command on the subordinate device. To identify whether the synchronization is complete, use the
display system stable state command. The synchronization is complete if the System State field
displays Stable.
Use this command to upgrade the original master and the subordinate members that have not been
upgraded, one by one. You must wait for one upgraded member to start up again and join the IRF
fabric before upgrading another member. After all members are upgraded, the ISSU status changes
to Init, and the ISSU process ends and cannot be rolled back.
Examples
# After member 2 is upgraded and becomes the new master, upgrade the original master (member 3)
and the other subordinate members that have not been upgraded (member 4 and member 1).
<Sysname> issu commit slot 3
Upgrade summary according to following table:
flash:/feature1.bin
Running Version New Version
Test 0001015 Test 0001016
Slot Upgrade Way
3 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]:y
This operation might take several minutes, please wait...Done.
<Sysname> issu commit slot 4
Verifying the file flash:/feature1.bin on slot 4..............Done.
Copying file flash:/feature1.bin to slot4#flash:/feature1.bin...Done.
Upgrade summary according to following table:
flash:/feature1.bin
Running Version New Version
Test 0001015 Test 0001016
Slot Upgrade Way
4 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]:y
This operation might take several minutes, please wait...Done.
<Sysname> issu commit slot 1
To Next Page
Loading...
