HPE FlexFabric 5940 SERIES

165
Syntax
display current-configuration diff
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the differences that the running configuration has as compared with the next-startup
configuration.
<Sysname> display current-configuration diff
--- Startup configuration
+++ Current configuration
@@ -17,7 +17,9 @@
#
vlan 200
#
-vlan 300
+vlan 400
+#
+vlan 500
#
<Sysname>
Table 23 Command output
Field Description
- - - A
+++ B
• A represents the source configuration for comparison, which can be
Startup configuration, Current configuration, or the name of the
source configuration file with its directory information.
• B represents the target configuration for comparison, which can be
Current configuration, Startup configuration, or the name of the
target configuration file with its directory information.
In this example, the startup configuration and the current configuration are
the source and target, respectively.
@@ -linenumber1,number1
+linenumber2,number2 @@
Location information for identifying the command line differences:
• -linenumber1,number1—Source configuration section that contains
differences. The linenumber1 argument represents the start line of the
section. The number1 argument represents the number of lines
between the start line and the end line of the section.
• +linenumber2,number2—Target configuration section that contains
differences. The linenumber2 argument represents the start line of the
section. The number2 argument represents the number of lines
between the start line and the end line of the section.