175
Usage guidelines
CAUTION:
In an IRF fabric, the undo startup saved-configuration command can cause an IRF split after the
IRF fabric or an IRF member reboots.
The startup saved-configuration command applies to all IRF members. To successfully execute
this command, make sure the specified file has been saved in the root directory of the storage
medium on each member.
If you do not specify the backup or main keyword, the startup saved-configuration command
specifies the main next-startup configuration file.
As a best practice, specify different files as the main and backup next-startup configuration files.
The undo startup saved-configuration command changes the file attribute of the main and backup
next-startup configuration files to NULL. However, the command does not delete the two
configuration files.
You can also specify a configuration file as a next startup file when you use the save command to
save the running configuration.
Examples
# Specify the main next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ....... Done.
Related commands
display startup
To Next Page
Loading...
Need help?
General