24
Syntax
display role feature-group [ name feature-group-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name feature-group-name: Specifies a feature group. The feature-group-name argument
represents the feature group name, a case-sensitive string of 1 to 31 characters. If you do not specify
a feature group, the command displays information about all feature groups.
verbose: Displays the commands of each feature in feature groups. If you do not specify this
keyword, the command displays only the feature lists of feature groups.
Usage guidelines
Feature groups L2 and L3 are predefined feature groups.
Examples
# Display the feature lists of feature groups.
<Sysname> display role feature-group
Feature group: L2
Feature: igmp-snooping (IGMP-Snooping related commands)
Feature: mld-snooping (MLD-Snooping related commands)
Feature: lacp (LACP related commands)
Feature: stp (STP related commands)
Feature: lldp (LLDP related commands)
Feature: dldp (DLDP related commands)
Feature: cfm (CFM related commands)
Feature: eoam (EOAM related commands)
Feature: smart-link (Smart-link related commands)
Feature: monitor-link (Monitor-link related commands)
Feature: loopbk-detect (Loopback-detection related commands)
Feature: vlan (Virtual LAN related commands)
Feature: trill (TRILL related commands)
Feature: mvrp (MVRP related commands )
Feature: qcn (QCN related commands)
Feature: rrpp (RRPP related commands)
Feature: ptp (PTP related commands)
Feature: ofp (OFP related commands)
Feature: port-security (Port-security related commands)
Feature group: L3
Feature: route (Route management related commands)
Feature: staticrt (Unicast static route related commands)
Feature: ospf (Open Shortest Path First protocol related commands)
Feature: rip (Routing Information Protocol related commands)
Feature: isis (ISIS protocol related commands)
Feature: lisp (LISP protocol related commands)
To Next Page
Loading...
Need help?
General