Hurco winmax - Page 298

XX - Index v546CO WinMax Lathe Conversational Part Programming
status, program -vii
STEP OVER field
Axial Mill Flats screen 2 - 169
Axial Mill Slot screen 2 - 161
Grooving 2-53
Profile Start screen 2-20
Radial Slot screen 2-103
STOCK ALLOWANCE field
Finishing 2-53
Profile Start 2-25
STOCK SURFACE field
Axial Mill Flats screen
Polar Coordinates 2 - 172
Rectangular Coordinates 2-173
stop block 2-7
STOP THE SPINDLE field 2-7
STOP TYPE field
Comment block 2 - 201
Store Machine Position console key
Change Part Setup 2 - 197
STORE MACHINE POSITION F5 softkey
Change Part Setup 2 - 197
STORE MACHINE POSITION F7 softkey
Position Block 2-5, 2-8
Straight drilling 2-59, 2-63, 2 - 180
STRAIGHT field
Axial Mill Flats screen 2 - 169
Axial Mill Slot screen 2 - 161
Radial Slot screen 2-104
STRATEGY field
Axial Mill Circle screen 2-147
Axial Mill Contour screen 2-128
Axial Mill Flats screen 2 - 168
Axial Mill Frame screen 2 - 154
Axial Mill Slot screen 2 - 161
Groove 2-53
Profile Start screen 2-18, 2-22
Radial Mill Circle 2-90
Radial Mill Contour 2-71
Radial Mill Frame 2-96
Radial Slot screen 2-103
Threading 2-39
string arguments, NC Program Call screen
2-210
STYLE field
Radial Lettering screen 2 - 110
SURFACE CLEARANCE field
Axial Mill Slot screen 2 - 161
Radial Slot screen 2-104
T
TABLE COMMANDS F7 softkey
Part Setup - Work Offsets screen 2-
197
Tailstock, Move Data Block 2 - 206
Tap 2-58
rigid 2-60
standard 2-60
TAP CYCLE field
Axial Holes Drill Operation screen 2-
181
Hole cycle 2-60
Radial Holes Drill Operation screen 2-
119
Taper 2-26
TAPER 1-2 and 4-3 fields, Grooving 2-56
TAPER ANGLE field
Threading Cycle 2-44, 2-48
Taper Element 2-30
TAPER F2 softkey, element 2-26
Tapping Operation 2 - 119
text entry window 1-7
TEXT field
Axial Lettering screen 2-176
Radial Lettering screen 2-111
text for the Comment block 2 - 201
thread
Face 2-40
ID Straight 2-40
ID Taper 2-40
OD Straight 2-40
OD Taper 2-40
THREAD DEPTH field
Threading Cycle 2-49
Thread description 1-3
THREAD TYPE field 2-40
Threading CYCLE screen 2-38
TIME OFF (SEC) field
Machine Function (M Code) field 2-199
TIME ON (SEC) field
Machine Function (M Code) field 2-199
TIP COMPENSATION field
Axial Holes Drill Operation screen 2-
179
Hole cycle 2-61
Radial Holes Drill Operation screen 2-
115
TOOL CHANGE OVERRIDE area
Position data block 2-7
TOOL CHANGE POSITION, USER DEFINED
field, Program Parameters screen 2-
194
TOOL DIAMETER field
Axial Holes Drill Operation screen 2-
179
Axial Lettering screen 2-175
Axial Mill Circle screen 2-147
Axial Mill Contour screen 2 - 128
Axial Mill Flats screen 2 - 168