Juniper MX960 - Connect Power Cables; Connect AC Power to Normal-Capacity Power Supplies; Connect AC Power to High-Capacity Power Supplies

Maintaining the MX960 Host Subsystem | 595
Maintaining MX960 DPCs | 598
Holding an MX960 DPC | 600
Storing an MX960 DPC | 602
Maintaining MX960 FPCs | 603
Holding an MX960 FPC | 606
Storing an MX960 FPC | 611
Maintaining MX960 MICs | 612
Maintaining MX960 MPCs | 613
Maintaining MX960 PICs | 616
Maintaining Cables That Connect to MX960 DPCs, MPCs, MICs, or PICs | 617
Maintaining MX-SPC3 Services Card | 619
Maintaining MX-SPC3 Services Card | 620
Replacing an MX-SPC3 | 620
Removing an MX-SPC3 | 621
Installing an MX-SPC3 | 623
Maintaining the MX960 Power Supplies | 624
Verifying the Version of the MX960 Cable Manager | 626
Converting to a Different Type of Power Supply | 629
Converting from AC to DC Power Supplies on an MX960 Router | 629
Converting from DC to AC Power Supplies on an MX960 Router | 638
Troubleshooting Hardware
6
Troubleshooting Components | 653
Troubleshooting Resources for MX960 Routers | 653
Command-Line Interface | 653
Chassis and Interface Alarm Messages | 654
Alarm Relay Contacts | 654
Craft Interface LEDs | 654
Component LEDs | 655
Juniper Networks Technical Assistance Center | 656
Troubleshooting the MX960 Cooling System | 656
Troubleshooting the MX960 DPCs | 657
xvi