Lexmark MS821

Error code Description Action
242.53 Paper fed from tray 5 never reached the sensor
(tray 2 pass‑through).
See
“Sensor (tray 2 pass‑through) late-arriving
or late‑leaving jam service check” on page 139.
242.55 Paper fed from tray 5 cleared the sensor (tray 2
pass‑through) later than expected.
242.57 Paper fed from tray 5 never cleared the sensor
(tray 2 pass‑through).
242.70 Motor (250‑sheet tray 2 transport) or Motor
(550‑sheet tray 2 transport) does not turn on.
See
“250‑ and 550‑sheet tray transport drive
jam service check” on page 150.
242.70 Motor (2100‑sheet tray 2 elevator) does not turn
on.
See
“2100‑sheet tray elevator drive jam service
check” on page 152.
242.71 Motor (250‑sheet tray 2 transport) or Motor
(550‑sheet tray 2 transport) does not turn o.
See
“250‑ and 550‑sheet tray transport drive
jam service check” on page 150.
242.71 Motor (2100‑sheet tray 2 elevator) does not turn
o.
See
“2100‑sheet tray elevator drive jam service
check” on page 152.
242.72 Motor (250‑sheet tray 2 transport) or Motor
(550‑sheet tray 2 transport) speed did not ramp
up to the required level.
See
“250‑ and 550‑sheet tray transport drive
jam service check” on page 150.
242.72 Motor (2100‑sheet tray 2 elevator) speed did not
ramp up to the required level.
See
“2100‑sheet tray elevator drive jam service
check” on page 152.
242.73 Motor (250‑sheet tray 2 transport) or Motor
(550‑sheet tray 2 transport) stalled.
See
“250‑ and 550‑sheet tray transport drive
jam service check” on page 150.
242.73 Motor (2100‑sheet tray 2 elevator) stalled. See
“2100‑sheet tray elevator drive jam service
check” on page 152.
242.74 Motor (250‑sheet tray 2 transport) or Motor
(550‑sheet tray 2 transport) ran too slow.
See
“250‑ and 550‑sheet tray transport drive
jam service check” on page 150.
242.74 Motor (2100‑sheet tray 2 elevator) ran too slow. See
“2100‑sheet tray elevator drive jam service
check” on page 152.
242.75 Motor (250‑sheet tray 2 transport) or Motor
(550‑sheet tray 2 transport) ran too fast.
See
“250‑ and 550‑sheet tray transport drive
jam service check” on page 150.
242.75 Motor (2100‑sheet tray 2 elevator) ran too fast. See
“2100‑sheet tray elevator drive jam service
check” on page 152.
242.76 Motor (250‑sheet tray 2 transport) or Motor
(550‑sheet tray 2 transport) ran too long.
See
“250‑ and 550‑sheet tray transport drive
jam service check” on page 150.
242.76 Motor (2100‑sheet tray 2 elevator) ran too long. See
“2100‑sheet tray elevator drive jam service
check” on page 152.
4064
Diagnostics and troubleshooting
132