Sensor (mailbox rear door interlock) removal
1 Remove the mailbox left cover. See “Mailbox left cover removal” on page 654.
2 Pry the mylar cover o the sensor latches.
3 Disconnect the cable (A), and then release the latches to remove the sensor.
A
Mailbox diverter plunger assembly removal
1 Remove the mailbox left cover. See “Mailbox left cover removal” on page 654.
2 Remove the mailbox rear door. See “Mailbox rear door removal” on page 649.
4064
Parts removal
658
To Next Page
Loading...
