Lexmark MS821

Jam locations
1 Finisher or output option bin
2 Standard bin
3 Door A
4 Multipurpose feeder
5 Trays
6 Finisher or output option rear door
• Door H
• Door K
• Door L
• Door N
• Door P
7 Door C
8 Stapler door
• Door F
• Door G
200 paper jams
200 paper jam messages
Error code Description Action
200.02 Paper fed from the MPF was detected earlier than
expected at the sensor (input).
See
“Sensor (input) early‑arriving jam service
check” on page 83.
200.03 Paper fed from the MPF was detected later than
expected or was never detected at the sensor
(input).
See
“Sensor (input) never- or late-arriving jam
service check” on page 85.
200.04 Paper fed from the MPF cleared the sensor (input)
earlier than expected.
See
“Sensor (input) early‑leaving jam service
check” on page 91.
200.05 Paper fed from the MPF never cleared the sensor
(input).
See
“Sensor (input) late-leaving or did-not-
clear jam service check” on page 87.
200.12 Paper fed from tray 1 was detected earlier than
expected at the sensor (input).
See
“Sensor (input) early‑arriving jam service
check” on page 83.
200.13 Paper fed from tray 1 was detected later than
expected or was never detected at the sensor
(input).
See
“Sensor (input) never- or late-arriving jam
service check” on page 85.
200.14 Paper fed from tray 1 cleared the sensor (input)
earlier than expected.
See
“Sensor (input) early‑leaving jam service
check” on page 91.
200.15 Paper fed from tray 1 never cleared the sensor
(input).
See
“Sensor (input) late-leaving or did-not-
clear jam service check” on page 87.
4064
Diagnostics and troubleshooting
81