Lexmark T652 - Page 133

7 Adjust the paper guide.
8 Lower the envelope weight.
9 Press .
260 error messages
Error code Description Action
260.00 Envelope feeder area jam
The media is jammed in the envelope feeder area.
Go to
“Envelope feeder area jam service
check” on page 134.
260.01 Envelope feeder assembly error
Mechanical feed error or timing error.
Go to
“Envelope feeder assembly error service
check” on page 135.
260.02
260.05 Sensor (envelope feeder pass through) lingering
jam (envelope feeder)
The media reached the sensor (envelope feeder
pass through), but did not clear it in the
specified
time.
Go to
“Sensor (envelope feeder pass through)
lingering jam (envelope feeder) service
check” on page 135.
260.06 Sensor (envelope feeder pass through) late jam
(envelope feeder)
The media is late reaching the sensor (envelope
feeder pass through) within the
specified
time.
Go to
“Sensor (envelope feeder pass through)
late jam (envelope feeder) service check” on
page 136.
260.07 Sensor (input) late jam (envelope feeder)
The media is late reaching the sensor (input)
within the specified time.
Go to
“Sensor (input) late jam service check”
on page 68.
260.10
260.11
260.12
260.13 sensor (envelope feeder pass through) static jam
Media remains on the sensor (envelope feeder
pass through) during the warm-up sequence.
Go to
“Sensor (envelope feeder pass through)
static jam service check” on page 137.
260.14 Sensor (input) late jam (envelope feeder)
The media is late reaching the sensor (input)
within the specified time.
Go to
“Sensor (input) late jam service check”
on page 68.
260.15
260.16
4062
Diagnostic information
133