8-19
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
Macro 296 is called when a user logs off. First his callsign is spoken, then this macro is called.
It is normally programmed to speak "control down".
Macro Definition
296 User Logoff Message
Macros 297..298 are automatically programmed by command 048 when it sets up a beacon. If
you are setting up beacons without using command 048, you can any macros you wish.
Macro Definition
297..298 Beaconing Message Macros
Macro 299 is used to speak "Autodial" before an autodial call is made. It corresponds to macro
289 which is used for non-autodial calls.
Macro Definition
299 Called before autodial number is read-back
Macro 299..399 are reserved for future applications
Macros 400..499 are user macros. They can be used for anything you want.
To Next Page
Loading...
Need help?
General
