Link Communications RLC-CLUB - Page 16

Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
161: Set Analog Smoothing Factor .......................................... 12-21
162: Always Send Serial Message out the Main Serial Port ......................... 7-5
163: Keypad Test ........................................................ 6-14
164: Recall Software Version ............................................... 17-6
165: Reset COP Watchdog Timer ............................................ 17-6
166: Display Status Screen ................................................. 17-7
167: Do Nothing ......................................................... 17-7
168: Set DTMF Acceptance Requirements ...................................... 3-4
169: Always Send Serial out Main Serial Port by ASCII Code ...................... 7-6
170: Record and Play Audio Test ............................................ 6-22
171: Record DVR Track (non-prompted) ...................................... 6-22
172: Record DVR Track (prompted) .......................................... 6-23
173: Play DVR Tracks .................................................... 6-23
174: Erase DVR Tracks .................................................... 6-24
175: Record Public Mail ................................................... 6-25
176: Check Public Mailboxes ............................................... 6-25
177: Retrieve Public Mail .................................................. 6-25
178: Erase Public Mail .................................................... 6-26
179: Record Private Mail .................................................. 6-26
180: Retrieve Private Mail ................................................. 6-26
181: Erase Private Mail .................................................... 6-27
182: Enable/Disable RLC-DVR1 ............................................ 6-27
183: Record a Message on the Internal DVR ................................... 6-29
184: Playback an Internal DVR Message(s) .................................... 6-30
185: Erase Internal DVR Message(s) ......................................... 6-30
186: Set up User Password ................................................. 18-6
187: User Log-on ........................................................ 18-7
188: Recall Who Is Logged In ............................................... 18-8
189: User Log-off ........................................................ 18-8
190: Assign a User Level to a Command ...................................... 18-9
191: Assign a Callsign to a User ............................................ 18-10
192..194: Not Currently Used ............................................... 17-8
195: Configure HF Mode .................................................. 15-4
196: Configure HF Radio .................................................. 15-5
197: Not Currently Used ................................................... 17-8
197: Set/Recall Transmit/Scan Band Edges .................................... 15-7
198: HF Mode Enable ..................................................... 15-9
199: Not Currently Used ................................................... 17-8
200..499: Execute a Macro .................................................. 8-4