L-INX User Manual 100 LOYTEC
Version 4.0 LOYTEC electronics GmbH
Figure 80: Select the Plug-in to be registered.
3. Click Register. The Configurator now appears in the Pending list.
4. Click Finish to complete the registration. Device templates for the LINX-10X are
added automatically and XIF files are copied into the LNS import directory.
Note: If you are using multiple databases (projects) make sure you have registered the plug-in in
each project.
5. Under LonMaker Network Properties Plug-In Registration make sure that the
LOYTEC LINX Configurator (Version X.Y) shows up under Already Registered.
Figure 81: Check that the L-INX Configurator is properly registered.
To Next Page
Loading...