LOYTEC L-INX - 2.2.2 IP Configuration via the Web Interface

L-INX User Manual 25 LOYTEC
Version 4.0 LOYTEC electronics GmbH
You should now be able to connect to the LINX-20X with a Web browser.
2.2.2 IP Configuration via the Web Interface
Optionally to using the console interface one can also use the Web interface to configure the
client device. In a Web browser enter the default IP address ‗192.168.1.254‘ of the
LINX-20X. Note that if your PC has an IP address in a subnet other than 192.168.1.xxx,
please open a command tool and enter the following route command to add a route to the
LINX-20X.
To Add a Route to the Device
1. Windows START  Run
2. Enter ‗cmd‘ and click OK.
3. In the command window enter the command line
route add 192.168.1.254 %COMPUTERNAME%
4. Then open your Web browser and type in the default IP address 192.168.1.254.
Figure 4: Example Start Screen.
5. Click on Config in the left menu. You will be asked to enter the administrator password
in order to change the IP settings. Enter ‗admin‘ and select Login.