Driving modes
6.2 Weighing the truck crane
6 - 8 3 302 819 en Operating manual
GMK3060
13.12.2018
– Determining the axle loads
All the axle lines belonging to an axle group
must always be weighed. In addition, all the
wheels must be on the same level. If for
instance only the axle group A1 is to be
weighed, then the axle groups A2 must be
equalised on a substructure U which has the
same height as the scales W1 and W2.
Axle groups
GMK3060
– Axle group 1 1st axle line
– Axle group 2 2nd + 3rd axle lines
To Next Page
Loading...
