EasyManuals Logo
Home>Manitowoc>Construction Equipment>GROVE GMK3060

Manitowoc GROVE GMK3060 User Manual

Manitowoc GROVE GMK3060
906 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #299 background imageLoading...
Page #299 background image
Malfunctions in driving mode
8.3 Warning and error messages
Operating manual 3 302 819 en 8 - 13
GMK3060
13.12.2018
Exhaust system temperature too high
The lamp (1) always lights up when during exhaust gas cleaning;
à p. 5 - 49.
May light up briefly under heavy loads, independently of any cleaning procedure.
• If the lamp remains lit after reducing the load and a cleaning procedure is not
being performed then check if the warning lamps (2) and (3) are lit and check
if a corresponding error message is present;
à Engine malfunctions, p. 8 - 19.
Exhaust system cleaning disabled
Automatic and manual cleaning have been disabled.
Enable the cleaning procedure as soon as you have left the danger area;
à Cleaning the exhaust system, p. 5 - 49.
Exhaust system cleaning required
– The lamp lights up
The automatic exhaust gas cleaning has not been carried out in time.
• Manually start the cleaning procedure as soon as possible to prevent further
error messages from occurring;
à Manual cleaning, p. 5 - 50.
– The lamp flashes
Information message – a cleaning procedure is being performed.
Refuelling
The fuel tank is filled only to a level of about 5%.
• Refuel before the fuel is used up; à p. 4 - 5.
If the fuel tank is almost empty, air will be sucked in and you will have to bleed
the fuel system;
à Maintenance manual.
s

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc GROVE GMK3060 and is the answer not in the manual?

Manitowoc GROVE GMK3060 Specifications

General IconGeneral
BrandManitowoc
ModelGROVE GMK3060
CategoryConstruction Equipment
LanguageEnglish

Related product manuals