Malfunctions in driving mode
8.6 Tilting/lowering the driver's cab
8 - 42 3 302 819 en Operating manual
GMK3060
13.12.2018
Lowering the
driver's cab
• Check that the lever (2) is pointing downwards (B).
• Pump with the socket wrench – the driver's cab is lowered.
• Lower the driver's cab to its end position.
• Continue to pump, until you feel a resistance – the driver's cab lock closes.
• Switch on the ignition and check that the symbol (1) has gone out.
• If necessary, lower the driver's cab further until the symbol (1) goes out.
• Remove the socket wrench
• If necessary, close the front flap; à Front flap, p. 3 - 75.
G
Risk of accidents if the driver's cab is not locked!
Ensure that the driver's cab is locked afterwards every time it is lowered.
This prevents the driver's cab tilting forward when braking.
To Next Page
Loading...
Need help?
General
