Metrohm 917 - Copying a File; Renaming a File

11.1 Managing files
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
88
￭￭￭￭￭￭￭￭
917 Coulometer
[Copy]
Copy the selected file to a different memory location (see chapter 11.1.1,
page 88).
[Delete]
Delete the selected file.
[Load]
Load the selected file.
11.1.1 Copying a file
Proceed as follows to copy a file:
1
Selecting the file
￭ Select the desired file.
￭ Tap on [Copy].
The selection of memory locations is displayed.
2
Copy the file
￭ Tap on the desired memory location.
Only memory locations currently being accessible are active.
The file is copied. The file group is retained, i.e. the group will be cre-
ated again in the new memory location if it does not already exist
there.
11.1.2 Renaming a file
Proceed as follows to rename a file:
1
Selecting the file
￭ Select the desired file.
￭ Tap on [Rename].
The Show files / Rename dialog is displayed.
2
Change the file name
￭ Tap on the input field File name.
The text editor opens.
￭ Enter a new file name (max. 32 characters) and confirm with
[OK].
￭ Tap on [OK].
The file is saved under the new name.