25.2 Saving the result table
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
198
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
917 Coulometer
Save result table
on | off (Default value: on)
If this option is activated, the result table will be deleted as soon as you
have saved it.
25.2 Saving the result table
NOTICE
When you save the result table, the complete determination will not be
saved with each entry. If you wish to save the determination data for
each determination, use the Save determination automatically
function (see chapter 15.5.6, page 140).
25.3 Loading the result table
Proceed as follows to load a result table:
1
Opening the current result table
ï¿ In the results dialog, tap on [Result table].
ï¿ Tap on [Load/ Save].
ï¿ Tap on [Load].
The selection of memory locations is displayed. This selection will
be skipped if only one external storage medium is available.
ï¿ Select the memory location where the desired result table is
saved.
The selection of file groups is displayed (see chapter 11.1, page
86). If only one group is available, then the list of the saved result
tables will be displayed directly.
ï¿ Select the group with the desired result table.
ï¿ Tap on [Show files].
The list with the saved result tables opens.
2
Selecting the result table
ï¿ Select the desired result table.
3
Loading the result table
ï¿ Tap on [Load].
The result table is now loaded and will be displayed immediately.
To Next Page
Loading...
Need help?
General
