Metrohm 917 - Metrohm Control Instruments

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 Device manager
917 Coulometer
￭￭￭￭￭￭￭￭
71
Entry x.x.x.x
Default value 192.168.10.10
MAC address
Unambiguous address of the network adaptor for identification within a
network. This parameter cannot be edited.
NetBIOS name
Unambiguous designation of the device within the network. This parame-
ter cannot be edited.
10.4 Metrohm control instruments
The following Metrohm devices can be used as control instruments:
￭ Ti-Touch Titrator (permanently entered as control instrument in the
device manager)
The following specifications apply for all of the control instruments men-
tioned above.
The dialog shows the control instrument with its measuring inputs, the
MSB connectors and connected peripheral devices (dosing device, stirrer,
Remote Box).
[Properties]
Open the properties dialog of the highlighted entry.
The following properties can be displayed and edited to a certain extent:
￭ Properties of the measuring inputs (see chapter 10.4.1, page 72)
￭ Properties of the MSB connectors (see chapter 10.4.2, page 73)
￭ Properties of the peripheral devices on the MSB connector (see chapter
10.4.3, page 74)