Metrohm 917 - Stirring

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
917 Coulometer
￭￭￭￭￭￭￭￭
217
6
Execute the function [Prepare].
The dosing unit can now be used.
27.4 Stirring
Manual control ▶ Stir
The MSB connector and type of stirrer is indicated for each connected stir-
rer.
You can control a connected stirrer manually with the function [Stir].
Proceed as follows:
1
Setting the stirring rate
￭ Tap on the [–] or [+] button.
Each time one of the buttons is tapped, the stirring rate is reduced
or increased by one level.
2
Switching on the stirrer
￭ Tap on [Start].
The stirrer is started.
3
Switching off the stirrer
￭ Tap on [Stop].
The stirrer is stopped.