ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
10 Device manager
917 Coulometer
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
63
10 Device manager
Main dialog: System â–¶ Device manager
This chapter describes how you can configure the Coulometer and the
connected peripheral devices. A detailed description of the hardware
installation can be found in the corresponding installation manual.
The instrument list gives the name and type of every instrument. The Ti-
Touch titrator is a component of the 917 Coulometer and therefore per-
manently entered as control instrument in the device manager. Peripheral
devices (dosing devices, stirrers, etc.) connected to the MSB connector are
entered in the list automatically. A USB/RS-232 adapter will also be auto-
matically recognized and entered in the instrument list with default set-
tings. A printer is entered in the instrument list in the default settings. You
must enter a PC keyboard, a barcode reader or a balance in the instru-
ment list yourself.
[New]
Add a new device to the list (see chapter 10.1, page 64).
[Delete]
Delete the selected device from the list.
NOTICE
Devices which are recognized automatically cannot be deleted from the
list while they are still connected.
[Edit]
Configure the selected device (see chapter 10.2, page 64).
To Next Page
Loading...
Need help?
General
