Metrohm 917 - Adding a New Sensor; Editing the Sensor Data

9.1 Adding a new sensor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
60
￭￭￭￭￭￭￭￭
917 Coulometer
9.1 Adding a new sensor
Before you can use a sensor, you must add it to the sensor list. To do this,
use the button [New].
￭ The properties dialog is opened after the sensor type has been
selected, see following chapter. The following sensor types can be
selected:
– Metal electrode (Pt electrode)
– Other sensor
– Temperature sensor
9.2 Editing the sensor data
Sensor list: Sensor ▶ New / Edit
All of the data for the selected sensor is displayed in the dialog Sensors /
Edit.
Sensor
The designation of the sensor is used for unambiguous identification.
Entry 24 characters maximum
Order number
Order number of the sensor.
Entry 24 characters maximum
Default value empty
Serial number
Serial number of the sensor.