10.9 Barcode reader
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
84
￭￭￭￭￭￭￭￭
917 Coulometer
10.9 Barcode reader
List of devices: Barcode reader ▶ Edit
A barcode reader can be connected to read in sample data or other texts.
A connected barcode reader will be recognized automatically and entered
in the list of devices with default settings.
You will hear an acoustic signal as confirmation that a character string has
been transmitted by the barcode reader and accepted.
NOTICE
The data will be read only if the system is in normal status, i.e. when no
determination is running.
Device name
Here you can enter a device name of your choice.
Entry 24 characters maximum
Comment
Entry 24 characters maximum
Barcode input target
Selection of the input field for the character string read in by the barcode
reader.
Selection Active input field | Method | Identification 1 |
Identification 2 | Sample size
To Next Page
Loading...
