EasyManua.ls Logo

Metrohm 917 - Removing an External Storage Medium; Adjusting the Touch Screen

Metrohm 917
338 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
■■■■■■■■■■■■■■■■■■■■■■
31 Appendix
917 Coulometer
■■■■■■■■
307
FAT32
ExFAT
CAUTION
If you format the storage medium with the ExFAT file system, it is pos-
sible that it will no longer be recognized by a PC. Read the pertinent
information from Microsoft Support at http://support.microsoft.com.
Do not use this file system unless you need to be able to save more
than 999 files in a single group.
31.8.3 Removing an external storage medium
System Diagnosis Remove storage medium
As long as the stored data is not being accessed (reading/saving data), you
can plug in and disconnect the storage medium without difficulty at any
time. The [Remove storage medium] function offers additional protec-
tion. This ensures that the storage medium cannot be removed while any
data is being transferred.
31.8.4 Adjusting the touch screen
System Diagnosis Touch adjustment
With time the touch-sensitive screen may not register touches at their pre-
cise position. You can readjust the screen in this dialog.
Proceed as follows:
1
In the main dialog, tap on [System].
2
Tap on [Diagnosis].
3
Tap on [Touch adjustment].
A message in English and a cross hair will appear in the center of the
screen.
4
Touch a stylus (a special pen-shaped instrument for operating devices
with touch screens) to the center of the cross hair and maintain this
position until the cross hair moves to a new position on the screen.
5
Repeat this process as long as the cross hair continues to be reposi-
tioned on the screen.
A message in English will appear.

Table of Contents

Other manuals for Metrohm 917

Related product manuals