ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
28 Parameter
917 Coulometer
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
277
NOTICE
We recommend masking lines that are of no interest or for which no
defined condition can be predicted with an asterisk (*).
Entry Bit patterns containing exactly 8 characters
or a max. of 24 characters for the name of
the template
Default value ********
Selection Selection of the templates defined
Timeout
When this time interval has expired without recognizing the remote signal,
the action defined in the following is triggered.
Input range 0 - 999 s
Default value 0 s
Action
Selection of the action which is carried out when the time interval has
expired.
Selection Display message | Document message | Cancel
determination
Default value Display message
For all three options it is documented in the deter-
mination data (see dialog More determination
data / Messages), that the time interval has been
expired.
Display message
A message is displayed. You can select whether you want to continue
with the determination or cancel the run.
Document message
In the determination data it will be documented, that the time interval
has been expired.
Cancel determination
The determination is stopped.
28.8.2 Setting remote lines (CTRL)
The command CTRL can be used to define output signals at the remote
interface.
Control device
Selection Selection of configured control devices
To Next Page
Loading...
Need help?
General
