6.1 Switching the instrument on and off
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
30
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
917 Coulometer
6 Operation
6.1 Switching the instrument on and off
Switching on the instrument
CAUTION
Peripheral devices (e.g., printers) must be connected and switched on
before you switch on the 917 Coulometer.
NOTICE
English is set as the default dialog language when the instrument is
switched on for the first time.
Proceed as follows:
1
ï¿ Press the power switch on the left-hand side of the back panel of
the 917 Coulometer.
The 917 Coulometer is initialized. A system test is performed. This
process takes some time.
NOTICE
If a buret unit is connected, then a request appears to carry out
the Prepare function:
All tubings and the cylinder are rinsed with the Prepare function.
The preparing of the buret unit is described in chapter 27.3.3,
page 215.
To Next Page
Loading...
Need help?
General
