Metrohm 917 - Figure 8 Unscrewing the Protective Cap from the Generator Electrode; Figure 9 Screwing the Electrode Cable to the Generator Electrode

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
917 Coulometer
￭￭￭￭￭￭￭￭
17
1
Figure 8 Unscrewing the protective cap from the generator elec-
trode
2
Tighten the 6.2104.120 electrode cable to the generator electrode.
2
6.2104.120
Figure 9 Screwing the electrode cable to the generator electrode
Connecting the electrode cable to the coulometer
1
Plug the electrode plug into the Gen. socket of the coulometer.