26.2 Settings of the individual reports
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
202
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
917 Coulometer
Frame
on | off (Default value: on)
If this parameter is activated, a frame is printed as lateral marking.
26.2 Settings of the individual reports
Fixed key [ ]: More reports â–¶ Report â–¶ Edit
Command REPORT: Report â–¶ Edit
Settings can be edited for the following reports (for details, see online
help):
ï¿ Result report
ï¿ Curve
Definition of the curve size, display of the individual measuring points
and grid lines, etc.
ï¿ Measuring point list
Definition of the method command to which the measuring point list is
to be printed.
ï¿ Calculations
Definition of the accuracy with which the variables used as well as the
results calculated are printed.
ï¿ Statistics short
Definition of the time at which the report is to be printed (with each
determination or only at the end of a sample series).
ï¿ Statistics overview
Definition of the time at which the report is to be printed (with each
determination or only at the end of a sample series).
ï¿ Sample table
ï¿ Result table
Definition of the time at which the report is to be printed (with each
determination, at the end of a sample series or at the end of the sam-
ple table).
ï¿ Used devices
ï¿ Variables
ï¿ Monitoring
To Next Page
Loading...
Need help?
General
