7.4 Measured value display
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
54
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
917 Coulometer
7.4 Measured value display
Main dialog: System â–¶ System settings â–¶ Meas. value display
This setting refers exclusively to the display of the measured values in the
live display and in the manual control. The values will, however, always be
stored with their full accuracy.
7.5 Acoustic signals
Main dialog: System â–¶ System settings â–¶ Acoustic signals
You can define acoustic signals in order to direct attention to particular
events. You can define signals for the following events:
ï¿ Wrong manipulation
An acoustic signal will sound each time an invalid action is attempted
(e.g. pressing [
] again when Help is open).
ï¿ Display a message
A short beep will sound each time a message appears on the display.
This informs the user that the message must be confirmed.
ï¿ Button contact
Each time a button is touched on the touch screen, this will be con-
firmed by an acoustic signal.
ï¿ External data input
An acoustic signal will provide confirmation each time data is received
from external devices (e.g. balance, barcode reader).
To Next Page
Loading...
Need help?
General
