15.2 Saving a method
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
128
￭￭￭￭￭￭￭￭
917 Coulometer
15.2 Saving a method
If you modify method parameters, then you can save these as your own
method.
To save a method, proceed as follows:
1
Open the command sequence
￭ In the main dialog, tap on [Edit parameters].
The command sequence of the method is displayed:
2
Modifying/applying the method name
￭ Tap on [Save method].
A method name will be suggested for new methods. If the
method has already been saved once, then the method name will
be displayed.
Applying the name:
To Next Page
Loading...
