Metrohm 917 - Opening and Closing the Manual Control

27.1 Opening and closing the manual control
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
208
￭￭￭￭￭￭￭￭
917 Coulometer
[Remote]
Scanning the input lines on the remote interface and setting the output
lines (see chapter 27.5, page 218).
27.1 Opening and closing the manual control
Opening the manual control
1
Opening the dialog window
￭ Tap on the fixed key [ ].
Manual control opens:
2
Select the function
￭ Tap on the button for the desired function.
If the function can be carried out by several devices, a dialog to
select the device will appear first; otherwise the dialog for the
selected function will appear immediately.
Closing the manual control
1
￭ Tap on the fixed key [ ].