Metrohm 917 User Manual

28.4 Evaluations (EVAL)
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
244
￭￭￭￭￭￭￭￭
917 Coulometer
28.4.1 Fixed endpoint evaluation (EVAL FIX-EP)
For the fixed endpoint evaluation, the associated values are interpolated
from the measuring point list for one quantity (measured value, volume,
etc.). Up to nine fixed endpoints can be evaluated with one command.
Fixed quantity
Selection of the quantity to which the associated value is interpolated
from the measuring point list.
Selection Measured value | Time | Volume
Default value Measured value
Fixed EP1 at
The fixed endpoint must lie between the first and the final entry in the
measuring point list.
The values that are actually measurable may vary from the values specified
here, depending on the hardware. The binding measurement value ranges
can be found in the .
Measured value (measuring mode Ipol):
Input range –2,000.0 - 2,000.0 mV
Selection off
Default value off
Measured value (measuring mode Upol):
Input range
–200.00 - 200.00 µA
Selection off
Default value off
Measured value (measuring mode T):
Input range
–20.0 - 150.0 °C
Selection off
Default value off
Time:
Input range
0.0 - 999999.9 s
Selection off
Default value off
Volume:
Input range
0.00000 - 9,999.99 mL
Selection off
Default value off

Metrohm 917 Specifications

General

Brand	Metrohm
Model	917
Category	Laboratory Equipment
Language	English