Metrohm 917 - Method Options

15.5 Method options
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
132
￭￭￭￭￭￭￭￭
917 Coulometer
2
Select a command group
￭ Tap on the desired command group.
In the case of [Report], the command is inserted directly into the
command list. For all other command groups, the available com-
mands will be displayed (titration / measuring commands, etc.).
3
Inserting a command
Tap on the desired command.
The dialog is closed and the command is displayed in the command
list.
15.5 Method options
Main dialog: Edit parameters ▶ Method options
Method options are settings which apply to the method as a whole and
not to an individual command.
The following settings are available:
￭ Activate/deactivate statistics calculations
￭ Save determination automatically
￭ Sign a method electronically
￭ Check the method when the determination starts
￭ Define a fixed sample size
￭ etc.
Statistics
on | off (Default value: off)
If this parameter is activated, then statistics calculations will be carried out
for all of the defined results. The prerequisite here, however, is that a vari-