￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
917 Coulometer
￭￭￭￭￭￭￭￭
207
27 Manual control
The following functions are available in the manual control:
[Measure]
Carrying out manual measurements (see chapter 27.2, page 209).
Measuring modes:
￭ Ipol (voltametric measurement with selectable polarization current)
￭ Upol (amperometric measurement with selectable polarization voltage)
￭ T (temperature measurement)
[Dosing]
NOTICE
Only active if a Dosino or dosing unit is connected.
Manual dosing (see chapter 27.3, page 211).
The following dosing functions are available:
￭ Preparing the exchange unit or dosing unit
￭ Emptying the dosing unit
￭ Filling the dosing cylinder of the exchange unit/dosing unit
￭ Dosing a specified volume
￭ Dosing continuously
[Stir]
Controlling the stirrer manually (see chapter 27.4, page 217).
To Next Page
Loading...
