ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
10 Device manager
917 Coulometer
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
77
Add or change comments allowed
on | off (Default value: on)
If this option is activated, then comments can be added to the PDF file.
10.5.2 Network printer
Printer: Edit â–¶ Network printer
If you have connected your Coulometer to your network, then you can
specify a network printer for your reports in this dialog.
NOTICE
If you have shared a memory location on a PC within your network and
if you have configured the Coulometer accordingly (see chapter 10.3.3,
page 68), then the settings for the parameters Domain, User and
Password will be applied and can then no longer be modified in this
dialog.
CAUTION
If the computer on which the network printer is configured does not
have the same subnet as the Coulometer, then a WINS server must be
present. The computer must be entered in this server.
Print server
Host name of the print server or the computer on which the network
printer is configured. If you are working with Windows, then you will find
the host name as follows: In the Windows command prompt window,
enter the command ipconfig -all. The host name is listed together with
other parameters of the print server or the computer.
Do not under any circumstances enter an IP address in this input field.
Entry max. 32 characters
Default value empty
Share name
Share name of the network printer on the above-specified computer.
Please note that the Share name of a network printer often does not
match the name of the printer. The share name can be found on the
Release tab in the Properties dialog of the released network printer.
Entry max. 32 characters
Default value empty
To Next Page
Loading...
Need help?
General
