ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
12 GLP manager
917 Coulometer
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
99
Display message
A message is displayed. You can select whether you want to continue
with the determination or cancel the run.
Document message
In the determination data it will be documented, that the time interval
has been expired.
Cancel determination
The determination is stopped.
Dialogs "GLP test "Measurement" / Hardware" and "GLP test
"Titration" / Hardware"
Test tool
Selection of the test tool. Test tools are defined at GLP manager â–¶ Test
tools.
Selection Selection of configured test tools
Control device
Selection of the control device with which the GLP test has been carried
out.
Selection Selection of configured control devices
Measuring input
Selection of the measuring input used for the GLP test. The selection is not
dependent on whether the control device has one or two measuring inter-
faces.
Selection 1 | 2
Default value 1
Dosing device
Selection of the MSB connector to which the dosing device is connected.
The selection does not depend on the number of MSB connectors of the
control instrument.
Selection 1 | 2 | 3 | 4
Default value 1
To Next Page
Loading...
Need help?
General
