Metrohm 917 - Page 140

14.5 Report header
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
126
￭￭￭￭￭￭￭￭
917 Coulometer
2
Copying the file to an external storage medium
￭ Copy the file "CustomImage.jpg" to the directory "917".
If this structure is not maintained, the file will not be found
because the software directly accesses the "917" directory.
￭ Plug in the external storage medium at the Coulometer.
3
Loading the graphics file
￭ In the Templates / Report header dialog, tap on the [Load]
button.
The file is copied to the internal memory.
￭ Switch the instrument off and back on again.
4
Applying the custom logo
￭ In the Templates / Report header dialog, activate the Print
logo option.
￭ Define Logo = Custom logo.
Your logo will now be printed in the report header of all reports in
the future.