ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
146
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
917 Coulometer
Autostart
on | off (Default value: off)
If this option is activated, a new determination is started automatically at
the end of a determination. This continues until the number specified has
been reached (siehe Number of autostarts).
NOTICE
If you deactivate this option while a determination is running, then that
determination will be ended, although the next one will however also
not be started. This can be used to cancel a sample series.
Number of autostarts
Number of automatic starts.
Input range 1 - 9999
Selection Table
Default value Table
Table
The number of automatic starts corresponds to the number of samples
in the sample table.
Sample number
The sample number is primarily used for documentation. Each time a
determination is started, it is increased by one. The sample number can,
however, also be entered manually. Each time the Coulometer is switched
on, the value is reset to zero.
Input range 0 - 9,999
Default value 0
[Logout]
User logout (visible only when work is done with activated login function).
[Favorites]
Save methods/sample tables as a favorite (see chapter 18, page 149).
Depending on whether you are working with or without login function,
user-specific or common favorites can be created. On the main dialog, a
button is created for each favorite. This way, a method or a sample table
can be started with one single mouse click.
[Delete table]
Delete the sample table completely.
[Reset autostart]
Reset the value of the autostart counter to zero.
To Next Page
Loading...
Need help?
General
