Metrohm 917 - Page 172

20.1 General
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
158
￭￭￭￭￭￭￭￭
917 Coulometer
[Edit]
Edit the data of the selected line (see chapter 20.2, page 159).
Saving a sample table
NOTICE
Sample tables can only be saved on external storage media or on a
shared file system.
Proceed as follows to save a sample table:
1
Opening the dialog
￭ In the Sample table dialog, tap on the [Load/ Save] button.
The Sample table / Load/Save dialog is displayed.
If no external storage medium is plugged in or if no file system is
shared, then [Save] is disabled.
2
Modify/apply a name
￭ Tap on [Save].
A name is suggested for new sample tables. If the sample table
has already been saved, the previous name will be displayed.
Applying the name:
￭ Tap on [Save].
The sample table is saved.
Entering a new name:
￭ Tap on the input field File name.
The text editor opens.
￭ Enter a new file name (max. 32 characters) and confirm with
[OK].
￭ Tap on [Save].
The sample table is saved.