￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
23 Results and more determination data
917 Coulometer
￭￭￭￭￭￭￭￭
175
Results dialog: Curve ▶ Display curve ▶ Measuring point list
The individual measured values are listed in the View data / Measuring
point list dialog. You can configure which columns are displayed ([View]
button). These settings are saved separately for each mode (KFC, MEAS,
etc.).
Column 1 / Column 2 / Column 3
Quantity displayed in the columns 1, 2 and 3. Both the selection of the
quantities and the default setting depend on the mode.
Selection Measured value | Water | Bromine | Time |
Temperature | Drift | Index
Endpoint details
Results dialog: More data ▶ View data ▶ Endpoint details
Results dialog: Curve ▶ Display curve ▶ Endpoint details
Detailed information concerning each equivalence point or endpoint
determined is displayed in the View data / Endpoint details dialog.
To Next Page
Loading...
