Metrohm 917 - Page 268

28.5 Calculations
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
254
￭￭￭￭￭￭￭￭
917 Coulometer
CAUTION
The command must be inserted directly before the corresponding titra-
tion or measuring command.
This command is identical with the CALC command except for the follow-
ing differences:
￭ The number of variables is limited.
￭ There are no result options.
￭ The result cannot be monitored.
￭ The result variable cannot be modified.
￭ The result will only be displayed in the live display. It appears neither in
the results dialog nor in a report.
Result name
With live calculations no custom result name can be defined, the designa-
tion LR cannot be modified.
Calculation formula
Shows the calculation formula. A special editor is opened for the defini-
tion (see chapter 28.5.3, page 255).
Entry max. 100 characters
Default value empty
Decimal places
Number of decimal places used to display the result.
Input range 0 - 5
Default value 2
Result unit
The result unit is displayed and saved together with the result.
Entry max. 10 characters
Selection % | mol/L | mmol/L | g/L | mg/L | mg/mL |
mg/100 g | ppm | g | mg | µg | mL | µL | mg/
piece | °C | µg/min | mL/min | µL/min
Default value %
[Note]
Entering a note on the calculation.