Metrohm 917 - Page 295

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Parameter
917 Coulometer
￭￭￭￭￭￭￭￭
281
NOTICE
Not all commands are available for subsequences. Commands which
cannot be inserted into subsequences are disabled.
[Delete command]
Delete the selected method command.
[Edit command]
Edit the selected method command.
28.9.1.1 Loading / saving a subsequence
[Load/ Save] is used to load stored subsequences or to save new subse-
quences. This means that they are available for all methods and only have
to be created once.
Loading a subsequence
[Own subseq.]
Opening the list of own subsequences.
[Load]
Loading the selected subsequence.
Saving a subsequence
Custom-made subsequences are saved in the internal memory.