7.3 User administration
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
42
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
917 Coulometer
The following data is displayed in the user list for each user:
ï¿ Name
ï¿ Dialog mode in which the user may operate the system.
ï¿ Status
You can use the user list two different ways:
ï¿ Operation with login function:
If you work with the login function activated, i.e. if each user must log
into the system before starting work, then only those users entered in
the list can log in. The user who is currently logged in is shown in the
main dialog.
ï¿ Operation without login function:
If you work without the login function, the users whose names are
entered in the list can be selected in the main dialog or a user name
can be entered. This makes it possible to document who has operated
the titration system.
[Login options]
Define the settings for the login, Audit Trail, etc. (see chapter 7.3.3, page
47).
[Create ID profile]
Create an identification profile for the selected user on a storage medium
(see chapter 7.3.2, page 46).
[New]
Adding a new user to the list (see chapter 7.3.1, page 43).
[Delete]
Delete the selected user from the list.
To Next Page
Loading...
Need help?
General
