4 - 62 (00292)H
has been completed.
BURST (L) refers to the “LOOP” mode where the segments are switched and repeatedly
recorded until “STOP” is clicked.
The “Variable Speed Recording” function is disabled with burst recording.
(4) Multi Trigger Recording
Partitions the selected memory segments into 2 - 64 blocks, and automatically switches
blocks for each trigger signal input for recording.
There is an “All Blocks” mode (MULTI (A) ) that ends recording with trigger signal input for
the number of blocks and a “Continuous” mode (MULTI (C) ) that repeatedly records until
“STOP” is clicked. The HX and GX cameras have an “AUTO” mode and a “LOOP” mode
that moves segments using trigger input for the number of blocks in the “All Blocks” mode.
Perform any of the following operations for multi trigger recording.
・ Set “Recording Trigger Modes” in the “Camera Details” dialogue to MULTI and
simultaneously specify the number of partition blocks.
・ Set “Recording Trigger Modes” under the recording parameter tab of the “List of Camera
Settings” window to MULTI and simultaneously specify the number of partition blocks.
Multi trigger recordings include MULTI (A) /MULTI (C) /MULTIS (A) /MULTIS (L).
MULTI (A) refers to the “All Blocks” mode that ends recording with trigger signal input for
the number of blocks.
MULTI (C) refers to the “Continuous” mode that performs repeated recording until the stop
button is clicked.
MULTIS (A) refers to the “AUTO” mode that ends recording with trigger signal input for the
number of segments.
MULTIS (L) refers to the “LOOP” mode where the segments are switched and repeatedly
recorded until the stop button is clicked.
(5) Multi Manual Recording (HX camera only)
Recording method where the number of frames per block is specified and images are
repeatedly generated.
Multi manual recordings include MULTI1 (A), MULTI1 (C), MULTI2 (A), MULTI2 (C),
MULTI3 (A), MULTI3 (C).
There are no settings for automatic segment switching.
To Next Page
