(00292)H 4 - 65
■ Auto View
Auto View is a function for HX and GX cameras that automatically starts VIEW when recording
has been completed.
If images are recorded to the current segment, it automatically switches to the next segment when
ARM is started.
The auto view settings are made in “All Camera Auto View” in the “Option” dialogue and are set
to all of the connected HX and GX cameras. Auto view settings cannot be set individually for
each camera.
OFF Auto View not used.
AUTO Records to the last segment. Images after recording is done are not
overwritten.
LOOP Returns to the first segment and switches to the VIEW mode after
recording the last segment. Overwrites even recorded segments when
ARM is started.
Auto View cannot be used together with the recording trigger mode (NORMAL (L)) that
automatically switches segments for recording. In this case, the recording trigger mode settings
take priority.
To Next Page
Loading...