(00292)H 8 - 11
8.6 Event Recording
This is a recording method that saves events when the trigger signal is ON.
■Precautions for Event Recording
・Since an event cannot be accessed with the HXLink “Trigger” button during event recording,
the “Trigger” button is disabled. Make sure to record with event signals and trigger input.
・The event is shown on the HXLink playback slider and the ability to frame jump events differs
according to the camera used on the segment.
HX Camera 63
GX Camera 15
Fx Camera 15
If the time stamp function is used with the GX camera, 16 or more events can be recorded.
However, with the 16
th
and subsequent events, only the event mark is superimposed on the
image of the frame input for the event signals, and the event mark is not shown on the
playback slider, and frame jumping for the event is not possible.
・With GX cameras, if there are more than 15 events, turn the time stamp ON.
To Next Page
Loading...