11 - 2 (00292)H
11.1 Overview of Batch Conversion Software
Batch conversion software is a tool to collectively perform format conversion of MCFF files
specified with HXLink.
Open a MCFF file with HXLink and set the format conversion to create a conversion settings file
with those settings. Create one conversion setting file for each format conversion.
Batch conversion software loads conversion setting files in a previous conversion settings folder
and executes the format conversion specified in the conversion settings file.
Flow of Batch Conversion
(1) HXLink Operations
1.1) Specify the destination folder for the conversion settings file (Initial)
1.2) Set parameters for MCFF format conversion
1.3) Create conversion settings file
(2) Batch Conversion Software Operations
2.1) Specify the destination folder to load the conversion settings file (Initial)
2.2) Execute conversion
11.2 Limitations with Batch Conversion Software Format
Conversion
The following limitations exist for the batch conversion software.
The source file is a MCFF or BMP file.
Format conversion cannot be performed on burst recorded or multi trigger recorded MCFF
files.
Conversion cannot be performed on partitioned and saved MCFF as a single scene.
The image size width and height must be a multiple of 4.
The following limitations exist for AVI conversion of sequential BMP files.
The number assigned to the BMP file name must be an integer greater than 0.
The format of the corresponding BMP file can only be 24 bit color and cannot be B/W (256
colors：8 bit).
To Next Page
