(00292)H 5 - 23
■"Superimpose Information" on the "Item Toolbar" (Basic Mode only)
When using the "Basic Mode", if "Superimpose Information" on the "Item Toolbar" is pressed,
select "All” in “Select Superimpose Information” to enable “Recording Comments”.
To cancel, select “None” in “Select Superimpose Information” to disable “Recording Comments”.
■ Superimpose Image
Specify the image to be superimposed in the "Conversion Settings" menu.
Items related to "Superimpose Image" in the "Conversion Settings" menu.
Superimpose Image Check to superimpose the image for the specified file on
the converted image.
Select File to Superimpose Image
Select the image file (BMP, JPG) to be superimposed on
the converted image.
Click to display the "Open File" dialogue, select the file
to be used and then click “OK”.
Superimposed Image Size
Select the superimposed image size that corresponds to the image size.
Small Enlarges/reduces the width of the superimposed image to
about 80 pixels.
Medium Enlarges/reduces the width of the superimposed image to
about 120 pixels.
Large Enlarges/reduces the width of the superimposed image to
about 180 pixels.
Actual Size Superimposes without enlarging/reducing the
superimposed image.
Superimposed Image Position
Select the superimposed image position to be
superimposed on the converted image.
Upper Left/Lower Left/Upper Right/Lower Right
To Next Page
Loading...