8 - 2 (00292)H
8.1 List of Recording Methods
HXLink can perform various recordings by controlling the MEMRECAM Q, MEMRECAM HX,
MEMRECAM GX, and the MEMRECAM fx.
This chapter describes the settings for each of the recording methods.
・External sync recording (EST)
・Multi camera sync recording with IRIG-B signals
・GX multi camera sync recording with the GX-HUB
・Multi camera sync recording with a combination of HX, GX, fx
・Event recording
・Burst recording
・Multi trigger recording
・Exposure phase shift recording
・Long term recording with post trigger
・Set exposure timing with trigger signal
・Frame straddling photography
・Multi camera sync recording with Q cameras
Settings for “Sync Settings”, “Input/Output Signals”, “Exposure Timing”, “Camera Frame Time”
required for each recording method can be performed with any of the following.
Settings with connected cameras
“Photograph” menu
“Options”
Settings when connecting cameras
“Camera Connection Settings”
Settings for “Exposure Phase”, “Frame Rate” and Shutter” required for each recording method are
performed during camera connection. “Exposure Phase”, “Frame Rate” and Shutter” are stored on
the camera so set once and record with the same settings.
To Next Page
Loading...